Call Deblocker (Outgoing) - Released Numbers; Switching The Call Deblocker (Outgoing) On/Off For Subscribers - Auerswald COMpact 4000 Operation Manual

Call Deblocker (Outgoing) – Released Numbers
Call deblockers can be added to the exchange line authorisations to expand dialling options
with additions of a certain supply of numbers (phone numbers for specific connections or
specific prefixes). Since call deblockers have a higher priority than call restrictors, they can be
used to release restricted numbers or parts of them.

Switching the Call Deblocker (Outgoing) On/Off for Subscribers

If a call deblocker (outgoing) is enabled for a subscriber, the subscriber can dial the phone
numbers entered in the call deblocker irrespective of his exchange line authorisation.
Proceed as follows:
• Separately for subscribers
Note: If differently configurable functions for private and business calls are
enabled, two different configurations can be created for each subscriber –
one for private calls and one for business calls (see also chapter Functions >
Private (Personalised) Exchange Line Access > Switching Differently Config-
urable Functions for Private and Business Calls On/Off).
• Separately for configurations
• For the exchange line transfer function (Settings > Basic settings > EXCHANGE LINE
CALL TRANSFER > Exchange line settings for the manually switched exchange line
access > Configure special exchange line settings > Configure)
• For the Call Through function (Functions > Call Through > EXCHANGE LINE SETTINGS
> Configure)
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Deblocker (Outgoing) – Released Numbers
Switching the Call Deblocker (Outgoing) On/Off for Subscribers
Functions
327