Setting The Priority Of The Group Filters - Auerswald COMpact 4000 Operation Manual

Functions
Online Name Search

Setting the Priority of the Group Filters

11. Click Save.
The search property will be taken over into the list.
12. Repeat steps 7 to 11 to enter additional search properties.
Note: If you have configured several search properties, you can determine
the application sequence of these filters. Click
search property in order to decrease its priority by one step. Click
the corresponding search property in order to increase its priority by one step.
13. Click Standard and repeat steps 3 to 12 to enter additional group filters for the
service providers.
Setting the Priority of the Group Filters
Up to five group filters can be created for each service provider. If several group filters have
been created, the sequence of application of these filters can be determined (priority).
Note: A group filter will only be processed if the application of group filters
with a higher priority has not been successful.
Proceed as follows:
• Using the configuration manager
Requirements:
• Group filters configured for the service provider
1. Open the page Functions > Online name search > Basic settings.
2. Click Configure in the line of the service provider in question.
3. Determining the priority: Click the arrow pointing downward next to the corresponding
group filter in order to decrease its priority by one step. Click the arrow pointing
upward next to the corresponding group filter in order to increase its priority by one
step.
400
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
next to the corresponding
next to