Auerswald COMpact 4000 Operation Manual page 261

1. Open the page Devices > Voice mail/fax boxes > Phone numbers.
2. Click New.
3. In the Box type list field, select the Fax box option.
4. Create box(es):
• Single box: In the from entry field, enter the desired box number.
• Several boxes: Enter the lowest number of the number range into the from entry
field and highest number into until the entry field.
Possible entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using numbers with few digits (two or three-digit numbers) inevitably restricts
the possible supply of numbers requiring more digits. For example, if the
number 12 is assigned, the numbers 120-129 and 1200-1299 will no longer
be available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the numbering plan.
5. If required, enter a name for identification purposes in the Name entry field.
Note: The name is shown on further pages of the configuration in addition to
the number.
6. In the Based on list field, select a template from all boxes created so far.
Template: When being created, the box is assigned all properties of the
selected template (except Users/authorisations).
Standard: The Basic settings are used for the box just created.
7. Click Save.
Note: A box can only be used if an owner has been assigned to it.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
10 to 9999
Voice Mail and Fax Boxes
Fax Box
Creating Fax Boxes
261