One-Man Transfer (Transferring Without Announcement); Placing External Communication Partner In Waiting Loop - Auerswald COMpact 4000 Operation Manual

One-Man Transfer (Transferring without Announcement)

Requirements:
• Internal transfer destination
During a call, proceed as follows.
1. Press the Flash key or the Query key.
2. Enter the internal number. Possible entries:
Internal number of the individual telephone
Direct exchange line telephone: with preceding **)
Internal number of the group
exchange line telephone: with preceding **)
3. Wait until you hear the ringtone.
4. Hang up the receiver.
Once the called subscriber accepts the call, he is connected to the external
subscriber.
Note: If the subscriber being called does not accept the call, the call will be
transferred back to your telephone 60 seconds later (your telephone rings).
If you do not accept the call within 60 seconds the call will be disconnected.
If your own telephone has become busy in the meantime, the procedure will
already be cancelled after the first 60 seconds and the external call will be
disconnected.

Placing External Communication Partner in Waiting Loop

Requirements:
• Internal transfer destination is a group (at least one subscriber logged in as incoming) or a
subscriber
If the internal telephone to which you are trying to transfer a call is busy, proceed as follows:
1. Wait.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
One-Man Transfer (Transferring without Announcement)
(for exchange line request type
(for exchange line request type Direct
Telephoning
Transferring
147