Resetting The Configuration - Auerswald COMpact 3000 analog Operating Manual

Service and Maintenance
Backing Up and Recovering Configuration Data

Resetting the Configuration

Note: The restoration is also provided during the quick configuration using
the configuration wizard.
2. In the Configuration file list field under Restore old configuration data, select the
restoration point for which configuration data should be restored.
3. Select or clear the check box Restore network settings under Restore old config-
uration data.
The network settings are restored.
The network settings are not restored.
4. Click Restore.
A confirm action dialogue opens.
5. Click Next.
The configuration data is restored at the restoration point. The PBX restarts.
Resetting the Configuration
When resetting the configuration, the following parameters are maintained—in contrast to a
reset of the ex-factory state:
• Admin user name, PIN and password
• IP address settings
• Web server port setting
• Time
• NTP server settings
• Saved hold music and announcements
• Call data
• Voice messages and faxes
• Dealer/operator data
The reset can be carried out as follows:
• Via the configuration manager
Requirements:
530
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020