Clip Texts; Configuring Clip Texts - Auerswald COMpact 4000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 4000:

Table of Contents

CLIP Texts

CLIP texts are displayed on the system telephones and/or the CLIP-capable analogue

telephones for specific calls (e.g., for wake-up calls).

Configuring CLIP Texts

CLIP texts can configured for the following calls and functions:

• CCBS callbacks: The configured CLIP text is displayed on system telephones during a

callback on busy.

• CCNR callbacks: The configured CLIP text is displayed on system telephones during a

callback on no reply.

• Wake-up calls: The configured CLIP text is displayed on analogue telephones during a

wake-up call.

• Exchange line reservation: The configured CLIP text is displayed on analogue telephones

during a call to signal that a line that was previously busy has become available.

• TAPI: The configured CLIP text is displayed on analogue telephones during a call that

signals the LAN-TAPI function.

• Callbacks: The configured CLIP text is displayed on analogue telephones during a callback

(on busy or on no reply).

Proceed as follows:

• Using the configuration manager

Requirements:

• System telephone or an analogue telephone with CLIP information alpha-numerically

• Phone number display (CLIP): CLIP info and Extended CLIP info enabled for the

analogue subscriber

1. Open the page Settings > CLIP texts.

2. Enter the CLIP texts in the corresponding CLIP text for ... entry fields under CLIP

display texts.

COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016

Show Quick Links

Table of Contents