Functions
Music on Hold and Announcement
Switching Music on Hold during the Ringing Period On/Off
Volume on telephone (in %)
Specifies how loudly the audio file is to be played on the telephone.
Listen
A suitable programme is used to open the audio file. The file is then either played or saved to
a (PC) data storage device.
Switching Music on Hold during the Ringing Period On/Off
If the music on hold during the ringing period option for Blind Transfer has been enabled, a
caller connected by a blind transfer will exclusively hear music on hold during this process
(pressing the R key, dialling of internal number, and ringing period).
If the music on hold during the ringing period option for announcement before answering has
been enabled, a caller connected to the PBX by the function Ann. before answering will hear
the music on hold after the playback of the announcement before answering.
If this function is disabled, the caller will hear the ringtone during the ringing phase.
Proceed as follows:
• Using the configuration manager
1. Open the page Settings > Basic settings.
2. Select or clear the Blind Transfer check box under MUSIC ON HOLD DURING THE
RINGING PERIOD.
3. Select or clear the Ann. before answering check box under MUSIC ON HOLD
DURING THE RINGING PERIOD.
514
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016