Loudspeaker Announcement; Creating An Announcement Output For Loudspeaker Announcements - Auerswald COMpact 4000 Operation Manual

Functions

Loudspeaker Announcement

Creating an Announcement Output for Loudspeaker Announcements

Loudspeaker Announcement
This function enables loudspeaker announcements over an active loudspeaker (for example,
a loudspeaker system in a department store/supermarket). In addition, a previously specified
phone number is called by an internal telephone. The call connection is immediately estab-
lished after dialling the phone number.
Creating an Announcement Output for Loudspeaker Announcements
In order to make loudspeaker announcements, a device that can be used as announcement
output (e. g. an a/b-Audiobox at a loudspeaker system) must be connected to the PBX. This
announcement output must be created in the configuration of the PBX and assigned an internal
number to call it.
The announcement output can be created with the device wizard. Various devices supported
by the PBX that can be used as announcement output are available as device templates for
this purpose. Their factory settings already include several default values for operation of the
announcement outputs.
If no of the device templates on offer matches your installation, you can select a user-defined
device template.
Proceed as follows:
• Using the configuration manager
Requirements:
• Announcement output (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
1. Open the page Devices > Device wizard.
2. Click New.
3. In the Device template list field, select a device template that matches the existing
announcement output.
4. Enter a name for the announcement output in the Name entry field.
376
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016