Auerswald COMpact 4000 Operation Manual page 529

Requirements:
• IPv6 status IPv6 static selected
1. Open the page Administration > IP configuration.
2. Click IPv6 configuration under ETHERNET CONFIGURATION.
3. Enter the IPv6 address of the PBX in the IPv6 address entry field. Possible entries:
Digits, characters and
4. Enter the length of the prefix in the Prefix length entry field. The prefix specifies to
which subnet the IPv6 address belongs. Possible entries:
Digits 1
5. Enter the address of the IPv6 gateway in the IPv6 gateway entry field. Possible
entries:
Digits, characters and
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
:
to 128
:
Identification
Configuring the IPv6 Address of the PBX
Settings
529