Auerswald COMpact 4000 Operation Manual page 712

Service and Maintenance
Backing Up and Recovering Configuration Data
Variants for Backing Up and Recovering Configuration Data
Saving and Reading Out the Configuration Data
The current configuration data on the PBX can be saved in a configuration file ("PBX name_-
date_time.cfg") on the PC. If necessary, the file can be saved in the PBX again in order to
restore an old configuration.
In addition to the configuration, the configuration data also include the network settings, PBX
data as well as the music on hold and all annoucements saved in the PBX. In the configuration
manager you can switch on or off the application or the readout of the network settings, PBX
data as well as the music on hold and announcements.
The network settings include the following data:
• Ethernet configuration (DHCP client setting, IP address, Sub-network mask, Gateway)
• DNS configuration (First DNS server, Second DNS server)
• HTTP proxy configuration (HTTP proxy settings)
• PPP configuration (Local IP address, Remote IP address)
• Port of the web server
The PBX data include the following data:
• PBX name
• Admin user name
• Admin PIN
• Admin passwort
• Dealer data
• Operator data
• Country
Restoration Points
If a restoration point for the configuration data is set, the current configuration data is saved in
a configuration file in the PBX. The configuration files are archived with information about the
time and date they were created.
A maximum of ten restoration points are set. If an eleventh restoration point is set, the oldest
of the current restoration points is overwritten.
An old configuration can be restored by loading a restoration point. The option as to whether
the network settings should be restored can also be selected.
Note: A restoration point is automatically inserted at every firmware update.
712
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016