Initiating Priority Call For Do-Not-Disturb - Auerswald COMpact 4000 Operation Manual

Telephoning
Unsuccessful Outgoing Calls

Initiating Priority Call for Do-Not-Disturb

3. Hang up the receiver.
As soon as the connection has been used, you are called by the central office for a
period of 20 seconds.
Note: A callback will be stored in the central office for a duration of up to
45 minutes. If the called subscriber has not used the connection until then,
the callback will automatically be deleted.
4. Pick up the receiver to the make the callback.
Note: If you do not pick up the receiver within the 20 seconds during which
the central office calls you, the callback request will be deleted.
If you pick up the receiver, the subscriber will be called.
Initiating Priority Call for Do-Not-Disturb
If the internal telephone you are trying to call is busy because it is set to do-not-disturb, proceed
as follows:
• Wait ten seconds.
The subscriber is now called.
138
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016