Auerswald COMpact 4000 Operation Manual page 257

5. In the until entry field, enter the highest number of the number range. Possible
entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using numbers with few digits (two or three-digit numbers) inevitably restricts
the possible supply of numbers requiring more digits. For example, if the
number 12 is assigned, the numbers 120-129 and 1200-1299 will no longer
be available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the numbering plan.
6. If required, enter a name for identification purposes in the Name entry field.
Note: The name is shown on further pages of the configuration in addition to
the number.
7. From the Owner list field, select the internal number (subscriber, group) to which you
want to assign the boxes.
Note:
An owner can query the box. If the administrator has not refused the access
authorisation, the user can perform the following changes/actions using the
configuration manager:
• Copying, moving, and deleting messages
• Properties of the box not controlled via a profile (except Users/authorisa-
tions and under Box settings the maximum recording capacity)
• Voice mail/fax box properties of the subscribers and groups not controlled
via a profile
• RSS feeds under Settings
The following properties of the owner will be applied to the box:
• Exchange line settings of the subscriber or exchange line settings of the group
(in a group with the Exchange line authorisation: Use the exchange line
authorisation of the subscriber, the box does not have any exchange line
authorisation).
• Only for subscribers: call allowance account
8. In the Based on list field, select a template from all boxes created so far.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
10 to 9999
Voice Mail and Fax Boxes
Fax Box
Creating Fax Boxes
257