Switching The Authorisation For Configuring Features Configured By The Network Provider On/Off - Auerswald COMpact 4000 Operation Manual

Functions
Call Forwarding

Switching the Authorisation for Configuring Features Configured by the Network Provider On/Off

External number
Short-code number
Switching the Authorisation for Configuring Features Configured by the Network
Provider On/Off
If the configuration of features to be configured by the network provider is enabled, the
subscriber has the following authorisations:
• Configuring forwarding of the own external number via telephone
• Switching the permanent configuration on/off via telephone
• Sending keypad information to the network provider
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Features to be configured by the network provider (CF, key
pad) check box.
462
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016