Switching The Call Deblocker (Outgoing) On/Off For Group - Auerswald COMpact 4000 Operation Manual

Functions
Call Deblocker (Outgoing) – Released Numbers

Switching the Call Deblocker (outgoing) On/Off for Group

Requirements:
• Configured call deblocker
1. Open the page Subscriber (scr.) > Properties > Exchange line settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call deblocker (outgoing) - business and Call deblocker
(outgoing) - private or Call deblocker (outgoing) check boxes.
4. If you have enabled a call deblocker, select the call deblocker you want in the corre-
sponding list fields.
Switching the Call Deblocker (outgoing) On/Off for Group
If a call deblocker (outgoing) is enabled for a group, the group members logged in as outgoing
can dial the phone numbers entered in the call deblocker irrespective of their exchange line
authorisation.
Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call deblocker
1. Open the page Groups > Properties > Exchange line settings.
2. In the list field at the top, select the group in question by its name or number.
328
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016