Auerswald COMpact 4000 Operation Manual page 358

Functions
Ringing Sequence
Configuring Ringing Sequence
Adding - fixed - Split Group: Here initially only one group members'
telephone is ringing. After the delay time configured under after: another single
group member will be called. If the group receives another call B initially the
free group members will ring one after the other (adding). If for the first call A
less than half of the group members are ringing more members are added to
this call until exactly the half is reached. If for the first call A more than half of
the group members are ringing, no members are added to this call (frozen).
Only the remaining subscribers are added to call B. If all group members are
already ringing for call A, the group is split for the calls. The order of calls
depends on the setting on the page Groups > Properties > Basic settings
under Priority. If a call was not accepted, although all logged-in members of
the group were called, the call would be finished with a busy signal.
Adding - balancing - Split Group: Here initially only one group members'
telephone is ringing. After the delay time configured under after: another single
group member will be called. If the group receives another call B initially the
free group members will ring one after the other (adding). If for the first call A
less than half of the group members are ringing more members are added to
this call until exactly the half is reached. If for the first call A more than half of
the group members are ringing, no members are added to this call (frozen).
Only the remaining subscribers are added to call B. If all group members are
already ringing for call A, the group is split for the calls. The order of the calls
depends on a priority list: First of all the member of the group first logged-in
gets the position 1 in the order of calls, the second one the position 2, ... . If
position 1 takes a call, the second call will be assigned to position 2. The
member of the group with the position 1 will get the last position in the order for
a future call after he has finished the current call. If a call was not accepted,
although all logged-in members of the group were called, the call would be
finished with a busy signal.
358
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016