Entering The Delay Time For Call Forwarding On No Reply For Groups; Switching Call Forwarding For External Numbers On/Off - Auerswald COMpact 4000 Operation Manual

Functions
Call Forwarding

Entering the Delay Time for Call Forwarding on No Reply for Groups

Entering the Delay Time for Call Forwarding on No Reply for Groups
The delay time for call forwarding on no reply for groups indicates after how many seconds a
call is forwarded.
Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the following page:
• For admin: Groups > Properties > Reachability
• For user: Group properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. in the Delay time for CF on no reply entry field under Function > Call Forwarding,
enter a value. Possible entries:
1 to 60: After 1 to 60 seconds a call on no reply will be forwarded if the
subscriber called does not respond.

Switching Call Forwarding for External Numbers On/Off

If call forwarding for an external number is enabled, external calls to the external number are
rerouted to other external connections.
460
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016