Copying Configurations; Switching A Configuration On - Auerswald COMpact 4000 Operation Manual

Functions
Configuration Switchover

Copying Configurations

Copying Configurations
You can copy configuration settings from one configuration into other, selected configurations.
Proceed as follows:
• Using the configuration manager
Requirements:
• A minimum of two configured configurations
1. Open the page Time control > Configurations.
2. Click Copy.
This opens the Copy configurations window.
3. In the list field at the top, select the configuration whose settings are to be copied.
4. Select the check box of the destination configurations into which the selected config-
uration is copied.
5. In the Configuration dependent settings column select the check boxes for the
settings that are to be copied.
6. In the Add/Replace column, select one of the available options.
7. Click Save.
8. Click Close.

Switching a Configuration On

You can switch on configurations manually and indepently of the switching times configured for
automatic configuration switchover.
364
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016