Switching Lcr For Call Through Calls On/Off; Configuring The Maximum Duration For External Call Through Calls - Auerswald COMpact 4000 Operation Manual

Functions
Call Through

Switching LCR for Call Through Calls On/Off

LCR for Call Through calls
Maximum duration for external Call Through calls
Exchange line settings for Call Through calls
2. Configure the call assignment. Doing this also specifies over which external number
the Call Through user calls the Call Through function and how many Call Through
calls can be made simultaneously.
3. Create the desired Call Through user. When you do this, add the corresponding
phone number as contact to the address book and select the conact as Call Through
user.
Note: Call Through is automatically configured for each of the four phone
numbers that can be entered for each contact, but only for a total of 400
contacts.
Switching LCR for Call Through Calls On/Off
If LCR for Call Through calls is enabled, even for Call Through calls the most cost-effective
telephone service provider is determined.
Proceed as follows:
• Using the configuration manager
1. Open the page Functions > Call Through.
2. Select or clear the LCR for Call Through calls check box under EXCHANGE LINE
SETTINGS.

Configuring the Maximum Duration for External Call Through Calls

Due to security reasons, external Call Through calls from the PBX have a time limit.
Proceed as follows:
• Using the configuration manager
320
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016