Switching Ntp Server Service On/Off - Auerswald COMpact 4000 Operation Manual

Settings
PBX Time

Switching NTP Server Service On/Off

Requirements:
• External S port (optional, see chapter Important Information > Product Details > Basic
0
Assembly and Extensions)
• Disabled automatic updating of the PBX time via the network
1. Open the page Settings > Date/Time of the PBX.
2. Select or clear the After each ISDN call check box under AUTOMATIC SYNCHRO-
NISATION OF THE PBX TIME/DATE.
Switching NTP Server Service On/Off
If the NTP server service is enabled, the PBX can be used as an NTP server by other devices
in the network.
Proceed as follows:
• Using the configuration manager
Requirements:
• PBX connection to the network
1. Open the page Settings > Date/Time of the PBX.
2. Select or clear the NTP server service check box under AUTOMATIC DISTRI-
BUTION OF THE PBX TIME/DATE.
664
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016