Auerswald COMpact 4000 Operation Manual page 46

Important Information
Technical Data
Configuration and Administration
Range
Call voltage
Audible signals
Impedances a/b
Internal S Port
0
Connection unit
Connection type
Supply voltage
Feeder
Range
Terminators
Internal U Port
P0
Connection unit
Connection types
Range
Supply voltage
Feeder
External S Port
0
Connection unit
Connection type
Range
Terminators
External Analogue Port
Connection unit
Type of dialling
Reception amplification
Transmission amplification
46
2 x 50 ohm, approx. 800 m at 0.6 mm diameter
Approx. 45 V , configurable: 25/50 Hz
eff
425 Hz +/-5 %, interval +/-10 %
Symmetrical
Spring clamp connection (4-core), optionally RJ-45 socket
S basis access as PTMP connection, EURO ISDN (DSS1),
0
short passive bus
40 V + 5 % / -15 %
Max. 4 W
Max. 150 m with typical telephone or network cable (twisted-
pair) for bus setup; European standards ENV41001
[DINV41001] and EN28877 apply to IAE termination
technology)
100 ohm, switchable; factory settings on
Spring clamp connection (2-core), optionally RJ-45 socket
U mit Euro ISDN Protocol (DSS1); 2 B channels per port,
P0
direct connection to a U
Screened cable: up to 600 m
Unscreened cable: up to 1000 m
40 V + 5 % / -15 %
Max. 4 W
Spring clamp connection (4-core), optionally RJ-45 socket
S basis access as PTMP connection or as a PTP
0
connection, EURO ISDN (DSS1), unit is powered locally
Max. 150 m with typical telephone or network cable (twisted-
pair)
100 ohm, switchable; factory settings on
Spring clamp connection (2-core), optionally RJ-45 socket
Tone dialling
Configurable: -12 to +12 dB
Configurable: -6 dB to +6 dB
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
telephone or to the U
P0
/S adapter
P0 0