Restoring Configuration Data From A Restoration Point - Auerswald COMpact 4000 Operation Manual

3. Click Yes.
The restoration point is inserted. It is available in the Configuration file list field under
RESTORE OLD CONFIGURATION DATA.
4. Click OK.

Restoring Configuration Data from a Restoration Point

Proceed as follows:
• Using the configuration manager
Important: Restoring an old configuration overwrites the current configu-
ration data.
Note: A configuration file that was created with an older firmware version,
may possibly not contain all of the configuration data (for example, data for
new functions that were added by a firmware update).
Requirements:
• Inserted restoration point
1. Open the page Administration > Data backup.
2. In the Configuration file list field under Restore old configuration data, select the
restoration point for which configuration data should be restored.
3. Select or clear the Restore network settings check box under Restore old config-
uration data.
4. Click Restore.
5. Click Yes.
The configuration data is restored at the restoration point. The PBX restarts.
6. Click OK.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Service and Maintenance
Backing Up and Recovering Configuration Data
Restoring Configuration Data from a Restoration Point
715