Resetting The Configuration - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Backing Up and Recovering Configuration Data

Resetting the Configuration

Resetting the Configuration
When resetting the configuration, the following parameters are maintained—in contrast to a
reset of the ex-factory state:
• Admin user name and PIN
• IP address settings
• Web server port setting
• Time
• NTP server settings
• Saved hold music and announcements
• Call data
• Voice messages and faxes
The reset can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page SERVICE > Data backup > Reset configuration.
2. Click Reset under Reset configuration.
A confirm action dialog opens.
3. Click Next.
The configuration is reset.
512
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11