Functions
Call Forwarding
Entering the Delay Time for Call Forwarding on No Reply for Subscribers
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the CF (groups) / Follow me check box.
Entering the Delay Time for Call Forwarding on No Reply for Subscribers
The delay time for call forwarding on no reply for subscribers indicates after how many seconds
a call is forwarded.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. in the Delay time for CF on no reply entry field under Function > Subscriber
Settings, enter a value. Possible entries:
454
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016