Overview Of The Call Distribution - Auerswald COMpact 4000 Operation Manual

If several configurations (PBX profiles) have been created, these will be available as
tabs.
2. With several configurations: Click the tab with the desired configuration.
3. In the CALL DISTRIBUTION FOR... list fields select the connection.
4. Select or clear the Delayed fallback check box.
If you have disabled delayed fallback, continue with step 9.
5. In the after: list field under Delayed fallback, select the time for delayed fallback .
Note:
The fallback time is the addition of the longest waiting time for the Call
Forwarding on no reply and the seconds configured in after:.
The longest waiting time will be determined by a comparison of the Delay
time for CF on no reply in the PBX and the Delay time for CF on no reply.
The delay times can be configured using the configuration manager:
Delay time for CF on no reply in the PBX under Public switched tel.
networks > ISDN connections > PTMP connection, Public switched tel.
networks > ISDN connections > PBX number/bundle > Configure and
Public switched tel. networks > Voice over IP (VoIP) > Accounts >
Configure
Delay time for CF on no reply under Subscriber (scr.) > Reachability
Delay time for CF on no reply
6. Click Save.
7. Repeat step 3 to 6, to configure the delayed fallback function for other connections.
8. Repeat step 2 to 7, to configure the delayed fallback function for other configurations
(PBX profiles).

Overview of the Call Distribution

The overview indicates on which internal subscribers a call on a separate external number is
signaled.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Call Distribution
Overview of the Call Distribution
651