Configuring Subscribers For Lcr; Importing The Lcr Configuration (Providers, Tariff Groups And Data) For Soft-Lcr 4.0 - Auerswald COMpact 4000 Operation Manual

Functions
LCR

Configuring Subscribers for LCR

Configuring Subscribers for LCR
Note:
LCR for Call Through calls is switched on/off on the page Functions > Call
Through under EXCHANGE LINE SETTINGS.
Manual LCR by dialling a preceding provider area code is always possible if
the network provider supports dial-around service.
Proceed as follows:
• Using the configuration manager
Requirements:
• Enabled LCR subscriber
1. Open the page Routing > LCR subscriber.
2. Click New.
3. Select the desired internal number from the list field or select from both list fields the
first and last internal number to create a list of several LCR subscribers.
Importing the LCR Configuration (Providers, Tariff Groups and Data) for Soft-
LCR 4.0
Using special tariff calculators (e.g., www.Telefon-Sparbuch.de), you can calculate an LCR
configuration and import this into the PBX.
Caution: When importing configuration data, existing LCR data is deleted.
Proceed as follows:
• Using the configuration manager
Requirements:
• A saved configuration file (*.xml, *.txt, also compressed *.gz) on a data storage device (PC)
382
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016