Auerswald COMpact 4000 Operation Manual page 482

Functions
Door Functions
Creating a Door Terminal
9. Enter the IP address required by the connected device in the IP address entry field.
Possible entries:
IP address with a range of 0 to 255 (example: 192.168.0.240)
10. Enter the port required by the connected device in the Port entry field. Possible
entries:
1 to 65535
11. Enter the user name (authentication data to control the relays) in the User name entry
field.
12. Enter the password (authentication data to control the relays) in the Password entry
field.
13. Enter the names of the relays and switch inputs in the Name entry fields.
Note: Relays and switch inputs which are offered in the device template, but
are not needed, can be deleted. To do so, click
14. Enter the SIP invites which the connected door terminal uses as signal in the SIP
invite entry fields (i. e. the phone number assigned to the door bell button within the
door terminal). Possible entries:
Digits and the characters * and #
Note: If default values have already been entered in the device template, the
entry fields will not be displayed. If you want to change these values, click
Expert.
15. In the Destination number list fields, select the required call destination. Or after
selecting Enter destination number, in the Destination number entry fields, enter
the required call destination. Possible entries:
External number
Short-code number
Internal number of the individual telephone
Internal telephone of the group
Note:
The call destination is first entered identically for all configurations. It can
bechanged afterwards.
482
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
.