Editing Provisioning Files - Auerswald COMpact 4000 Operation Manual

5. Click .
The new file is displayed in the list of provisioning files.
6. Click Edit in the line of the new provisioning file.
7. Carry out the required modifications in the code editor.
Hinweis: By clicking Account IDs on top right, you will find the used account
IDs for the PBX and the exchange lines.
8. Click Save.

Editing Provisioning Files

Provisioning files can be opened for editing in an integrated code editor.
Note: We recommend to contact the system administrator or specialised
dealer to edit provisioning files.
Note: You will find further information about provisioning files on the Internet
(see http://www.auerswald.de/service
Proceed as follows:
• Using the configuration manager
1. Open the page Subscriber (scr.) > IP provisioning > File management.
2. Click Edit in the line of the provisioning file to be edited.
3. Carry out the required modifications in the code editor.
Hinweis: By clicking Account IDs on top right, you will find the used account
IDs for the PBX and the exchange lines.
4. Click Save.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Provisioning for IP Telephones
under Developer).
Service and Maintenance
Editing Provisioning Files
741