Auerswald COMpact 4000 Operation Manual page 113

VoIP
You can only create, configure and delete accounts (not providers) on this page. You can make
further account settings under Public switched tel. networks > Voice over IP (VoIP) >
Accounts.
Only the standard providers included in the scope of delivery and the providers made available
by the Auerswald update server are offered for selection. You can create, configure and delete
providers under Public switched tel. networks > Voice over IP (VoIP) > Accounts.
For further information, click
Subscriber
When the database of the PBX is still empty (e. g. after having been returned to its factory
settings), subscribers and phone number are created automatically for each plugged-in module
it detects and for each port on the COMpact 4000 interface board.
You can delete the proposed subscribers and create your own subscribers with phone number
and name, and assign them to a module or a device type. The corresponding PINs and
passwords are assigned automatically. You can change, but not delete them.
Possible device types:
• ISDN telephone
• ISDN system telephone
• ISDN PC controller
• Fax machine
The configuration wizard does not offer the following device types for configuration. They must
be configured under Devices:
• Voice mail/fax boxes
• Door terminals
• Announcement outputs
• Alarms
• Switch inputs
• Relays
You can make further settings under Subscriber (scr.) > Phone numbers.
For further information, click one of the help topics.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
or one of the help topics.
Introduction to the Configuration Manager
Configuration Manager
Configuration Wizard
113