Service and Maintenance
Restart
Causes of an Automatic Restart
Causes of an Automatic Restart
An automatic restart is executed after the following functions have been carried out:
• An instant firmware update
• Restoring firmware (reboot)
• A factory settings restoration
• Restoring Configuration Data from a Restoration Point
• A configuration reset
Note: Resetting the configuration requires only a limited restart. Only some
of the PBX functions are restarted. All calls are ended, and all data services
are closed. The web server remains unaffected by this.
Performing a Restart
Note: All connections to the web server, all calls and data services will be
disconnected this way. All unstored information will be lost!
Proceed as follows:
• Using the configuration manager
• By pressing a button
Using the Configuration Manager to Restart Immediately or Delayed
1. Open the page Administration > Firmware update/restart.
2. In the list field under RESET OF THE PBX (RESTART), select one of the available
options.
3. Click Restart under RESET OF THE PBX (RESTART).
700
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016