Initiating Private Exchange Line Access; Initiating Private Exchange Line Access Without A Pin - Auerswald COMpact 4000 Operation Manual

2. Select or clear the Differently configurable functions for private and business
calls check box under SUBSCRIBER SETTINGS.

Initiating Private Exchange Line Access

The subscriber that want to make personal calls can initiate private exchange line access on
any internal telephone by entering the user PIN. Personal calls are assigned to the subscriber
in question in the call data record based on the user PIN.
Requirements:
• User PIN configured for the subscriber
1. Pick up the receiver of any internal telephone.
2. Dial ##92.
3. Enter the user PIN.
4. Dial *.
5. Enter the external number. Possible entries:
External number
preceding exchange line access number)
Short code number
telephone: with preceding **)
You are making a personal call.

Initiating Private Exchange Line Access without a PIN

Authorisation granted specifically to the subscriber allows private exchange line access without
requiring a user PIN to be initiated on the subscriber's own telephone. The charges are billed
to the telephone used.
Requirements:
• Authorisation Private exchange line access without PIN assigned to the subscriber
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
(for exchange line request type Internal telephone: with
(for exchange line request type Direct exchange line
Private (Personalised) Exchange Line Access
Initiating Private Exchange Line Access
Functions
417