Auerswald COMpact 4000 Operation Manual page 827

Disabling Call Forwarding on Busy (on an Internal Telephone)
## 96 Own number
Own number
Additional information Authorisation required
Configuring Call Forwarding on No Reply (on an Internal Telephone)
## 96 Own number
Own number
Destination number
Additional information Authorisation required
Enabling Call Forwarding on No Reply without Re-entering the Number (on an Internal
Telephone)
## 96 Own number
Own number
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
## 67 #
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The number can be omitted if call forwarding is to be configured for
the number currently sent by the telephone.
The destination number may only be an external number.
Permanent configuration is enabled.
# * 61 * Destination number
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The 1st number can be omitted if call forwarding is to be configured
for the number currently sent by the telephone.
Internal or external number to be called
Internal number of the group or subscriber (for exchange line request
type Direct exchange line telephone: with preceding **)
or
External number (for exchange line request type Internal telephone:
with preceding exchange line access number)
Authorisation for external destination required
The destination number may only be an external number.
Permanent configuration is enabled.
# * 61 #
Own phone number (number without exchange line access number
(unaffected by a direct exchange line telephone))
The number can be omitted if call forwarding is to be configured for
the number currently sent by the telephone.
Call Forwarding for External Numbers
#
Short Reference
827