Closing The Casing - Auerswald COMpact 4000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 4000:

Table of Contents

Installation and Commissioning

Preparation (COMpact 4000)

Closing the Casing

Requirements:

• After installation, cables carefully reinserted into the cable space

Note: The connections for the first commissioning (connection to a PC/

network and, if necessary, connection of a few end devices) must be made

before the casing is closed. Alternatively, you can prepare them by laying a

connecting cable that leads out of the casing.

Important: Before closing the casing, secure the Ethernet cable with a cable

tie to one of the straps provided for strain relief.

COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016

Show Quick Links

Table of Contents