Configuring The Call Type Used For Account Debiting; Switching Recording Changes For Account Debit During Transfers On/Off - Auerswald COMpact 4000 Operation Manual

1. Open the page Functions > Call allowance accounts.
2. Enter a value in the Maximum credit for a account (max. 500 EUR) entry field under
CHARGE. Possible entries:
0 to 500: Specifies the maximum credit for charge accounts from 0 to 500
euros.

Configuring the Call Type Used for Account Debiting

Proceed as follows:
• Separately for business and personal calls
• Using the configuration manager
Requirements:
• Soft LCR configured
• Tariff table set up
1. Open the page Functions > Call allowance accounts.
2. Select or clear the check boxes Charge account for business calls, Charge
account for private calls or Charge account for group calls under ACCOUNT
DEBIT.

Switching Recording Changes for Account Debit during Transfers On/Off

If the recording change for account debit during a transfer is enabled, after transferring a call
to another internal end device, the account of the other subscriber is recorded as the one to
make the charge to.
Note: Changing the recording for the account debit during a transfer is also
taken into consideration in the call data list.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Allowance Account
Configuring the Call Type Used for Account Debiting
Functions
339