Identification (Ipv4 Address, Subnet Mask, Gateway, Dhcp Client) - Auerswald COMpact 4000 Operation Manual

Short Reference

Identification (IPv4 Address, Subnet Mask, Gateway, DHCP Client)

Identification (IPv4 Address, Subnet Mask,
Gateway, DHCP Client)
Note: Only IPv4 addresses can be entered using a character string on the
telephone. IPv6 addresses must be entered using the configuration manager
of the PBX.
Configuring the IPv4 Address of the PBX (on an Internal Telephone)
## 8 PIN * 931 *
PIN
E
Querying the IPv4 Address of the PBX (on an Internal Telephone)
## 8 * 941 #
Additional information Display of the IPv4 address of the PBX on the telephone display after
Configuring the Subnet Mask of the PBX (on an Internal Telephone)
## 8 PIN * 932 *
PIN
E
Querying the Subnet Mask of the PBX (on an Internal Telephone)
## 8 * 942 #
Additional information Display of the subnet mask on the telephone display after callback by
Configuring the Gateway of the PBX (on an Internal Telephone)
## 8 PIN * 933 *
PIN
E
802
E #
Admin or sub-admin PIN
IPv4 address of the PBX (12 digits)
callback by the PBX
E #
Admin or sub-admin PIN
Subnet mask (12 digits)
the PBX
E #
Admin or sub-admin PIN
IPv4 address of the gateway (12 digits)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016