Room Monitoring - Auerswald COMpact 4000 Operation Manual

Short Reference

Room Monitoring

Room Monitoring
Enabling Room Monitoring (Only at a Single Internal Telephone at the Same Time)
## 8 * 61 #
Additional informa-
tionen
Performing Room Monitoring (from an Internal Telephone)
Destination number
Destination number
Performing Room Monitoring (from an External Telephone)
Remote switching number
Remote switching
number
PIN
Additional informa-
tionen
816
Subsequently place the receiver next to the telephone.
To disable Room Monitoring, replace the receiver.
Internal number of the single telephone (for exchange line request
type Direct exchange line telephone: with preceding **)
## 8 PIN * 60 #
Remote switchin number for remote programming
External PIN
You need an analogue DTMF telephone, an ISDN telephone with
DTMF dialling or an DTMF sender.
Wait for confirmation tone after entering the remote switching
number.
You will hear another confirmation tone after entering the character
string.
If you hear the busy signal, replace the receiver and start again.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016