Switching The Authorisation For Opening The Door On/Off - Auerswald COMpact 4000 Operation Manual

Requirements:
• Relay/actuator (optional, see chapter Important Information > Product Details > Basic
Assembly and Extensions)
• Created door terminal
1. Open the page Devices > Door terminals.
2. Click the first
terminal.
Note: If relays which are part of other devices (e. g. an IP switch relay), a list
field will appear now. Select one of the existing relays and click
not want to use any of the existing relays, select New relay in the list field.
The relay will be created as part of the door terminal.
3. Enter a name for the relay in the Name entry field.
4. Select one of the available options in the Operating mode of the relay list field.
Note: You will only be offered operating modes which are not yet used for
relays of this door terminal.
5. Click Ok.
Note: To create further configurations for a relay, click
corresponding relay. The configuration is described in the chapter Functions
> Relays (Actuators).

Switching the Authorisation for Opening the Door On/Off

If the authorisation for opening the door is enabled, the subscriber in question can telephone
with the door and open the door by pressing a key.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
under Door calls+Relay in the line for the corresponding door
Switching the Authorisation for Opening the Door On/Off
in the line of the
Functions
Door Functions
. If you do
491