Entering Service Numbers - Auerswald COMpact 4000 Operation Manual

1. Open the page Public switched tel. networks > Emergency calls > Emergency
numbers.
2. Click New.
3. Enter a new emergency number in the first free Emergency numbers entry field.
4. Enter a name for identification purposes in the Name entry field.
Note: The name is used for display purposes on the system telephone. The
name along with the phone number also appears on some pages of the
configuration manager (e.g. Call data list).
5. Click Save.
6. Repeat Steps 2 to 5 to enter additional numbers.

Entering Service Numbers

You can enter up to ten external numbers as emergency call or service numbers.
Note:
Some countries (e.g. Denmark, Greece, Luxembourg) do not have a fixed
number sequence for their area codes. If this also applies to the location at
which the PBX is installed, you do not need to enter an area code.
Entering service phone numbers without an area code reduces the size of the
internal call numbering plan. For example, if the service phone number is
115, this means the internal numbers 115 and 1150 to 1159 are no longer
available.
The exchange line access number is never entered when entering service
numbers.
Proceed as follows:
• Using the configuration manager
1. Open the page Public switched tel. networks > Emergency calls > Service
numbers.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Settings
Emergency Calls
Entering Service Numbers
659