Tones - Auerswald COMpact 4000 Operation Manual

Settings

Tones

Exporting Holidays
Tones
The PBX supports different tones on the receiver in order to signal the various operating states
on the PBX:
• External dial tone (long dial tone): After dialling the exchange line access number, when a
free external line is available – dialling a phone number is possible
• Internal dial tone (extension dial tone): After picking up the receiver or after pressing the
Flash or Query key, when a free line is available – dialling a phone number is possible
Note: On standard VoIP telephones, a dial tone is generated by the
telephone itself, even when no free line is available.
• Confirmation tone: At the completion of programming, when the programming has been
successfully executed
• Busy tone:
After picking up the receiver, when no free line is available or an authorisation is
missing
After dialling a phone number, when the desired connection is busy or the network is
overloaded or an authorisation is missing
At end of call
During programming, when the programming was unsuccessful or an authorisation is
missing
During a Call Through call, when the phone number transferred from the mobile
phone is not permitted to use Call Through
• Call tone: during the call phase
• Special tone 1 and special tone 2:
After picking up the receiver (when a special tone has been configured as notification
that call forwarding, do-no-disturb or baby call has been switched on)
After picking up the receiver (when a special dial tone has been enabled), when the
call data memory is full
• Call waiting tone: During a call (when call waiting has been enabled), when another call
comes in – it is possible to accept or reject the additional call
• Changing tone:
During a Call Through call, when the phone number transferred from the mobile
phone is permitted to use Call Through - dialling a phone number is possible
During a remote programming call, when the connection for remote programming is
available – programming is possible
668
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016