Performing Call Pick-Up - Auerswald COMpact 4000 Operation Manual

Functions
Pick-up

Performing Call Pick-up

Performing Call Pick-up
Proceed as follows:
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
• Call pick-up enabled for the subscriber
• To carry out call pick-up of an external call: Exchange line authorisation assigned to the
subscriber for incoming calls (International, National, City or only incoming, with
emergency call)
If the answering machine has already taken the call, proceed as follows:
1. Pick up the receiver of your telephone.
2. Dial ##06.
3. Enter the internal number of the answering machine that is conducting the call to be
picked up. Possible entries:
Internal number of the individual answering machine
request type Direct exchange line telephone: with preceding **)
Internal number of the group
exchange line telephone: with preceding **)
You are connected with the caller.
410
(for exchange line request type Direct
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
(for exchange line