Auerswald COMpact 4000 Operation Manual page 39

Internal Analogue Port
An internal analogue port is suitable for connecting to one of the following end devices:
• Analogue telephones with DTMF dialling, e. g. COMfortel 600
• Analogue telephones with pulse dialling
• Analogue fax machines
• Analogue answering machines
• Modems
Important: Devices using pulse dialling cannot use the full range of features
of the PBX, for example, transfer a call.
Devices using dual-tone multi-frequency dialling must be equipped with a
flash key (also referred to as signal key R).
Note: When using a T-Net-capable analogue telephone, most T-Net
functions can be used via the existing function keys on the telephone.
For various audio, switching and door functions several accessories can be connected to the
internal analogue port.
The PBX supports the following accessories from Auerswald:
• a/b door terminals, e. g. TFS-Dialog 200/300, TFS-Universal plus
• a/b Audioboxes
The PBX supports the following a/b door terminals from other manufacturers:
• Series 20 a/b from Telecom Behnke
• Siedle DCA 650-02
• Ritto TwinBus TK-Adapter a/b
• GIRA DCS-TC-Gateway
• ELCOM BTI-200
Important: A maximum of 24 W is available for all the a/b, S
together.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Important Information
Product Details
Basic Assembly and Extensions
and U ports
0 P0
39