Configuring Number Presentation (Internal) For Group Calls - Auerswald COMpact 4000 Operation Manual

Functions

Configuring Number Presentation (Internal) for Group Calls

Configuring Number Presentation (Incoming) for Group
Configuring Number Presentation (Internal) for
Group Calls
With this feature, it is possible to select the number which is presented when a subscriber
makes an internal call as a group member.
Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the following page:
• For admin: Groups > Properties > Settings
• For user: Group Properties > Settings.
2. In the list field at the top, select the group in question by its name or number.
3. In the Number presentation (internally) list field, select one of the following options:
Group numbers: All subscribers logged in outgoing to these group will present
the group number for internal outgoing calls. If the group is internally called the
subscriber number is transferred back.
Subscriber number: All subscribers logged in outgoing to these group will
present their own subscriber number for internal outgoing calls.
446
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016