Configuring The Call Duration For The Door Call - Auerswald COMpact 4000 Operation Manual

Functions
Door Functions

Configuring the Call Duration for the Door Call

1 x long: 1 long tone (1 second), 4 second pause, ...
3 x short: 3 double tones, approx. 1 second pause, ...
1st special tone: Uninterrupted pulsing
2nd special tone: Continually repeating double tones (3 double tones in
5 seconds)
3rd special tone: 1 double tone, approx. 4 second pause, ...
4th special tone: 2 short tones, approx. 4 second pause, ...
5th special tone: 2 long tones, approx. 3 second pause, ...
6th special tone: 1 short and 1 long tone, approx. 4 second pause, ...
Note: Many answering machines need a ringtone similar to the public
exchange line for automatic switching on (1 second ringing, 4 seconds pause
= 1 x long). Pay attention to this when selecting the ringtone if you like to use
this function for an anwering machine.
Configuring the Call Duration for the Door Call
The call duration defines how long a door call will ring for an internal subscriber.
Proceed as follows:
• Separately for door calls
• Separately for configurations
• Using the configuration manager
Requirements:
• Door terminal and switch input (optional, see chapter Important Information > Product
Details > Basic Assembly and Extensions)
• Configured door call
1. Open the page Devices > Door terminals.
2. Click in the line of the corresponding door call.
3. In the Call duration list field select the desired call duration.
488
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016