Auerswald COMpact 4000 Operation Manual page 223

Note:
An owner can query the box. If the administrator has not refused the access
authorisation, the user can perform the following changes/actions using the
configuration manager:
• Copying, moving, and deleting messages
• Properties of the box not controlled via a profile (except Users/authorisa-
tions and under Box settings the maximum recording capacity)
• Voice mail/fax box properties of the subscribers and groups not controlled
via a profile
• RSS feeds under Settings
• Recording, storing in the PBX, reading from the PBX (downloading), listening
to and deleting of announcements
• Properties of the box under Call acceptance/announcement, which are not
controlled via a profile
The following properties of the owner will be applied to the box:
• Exchange line settings of the subscriber or exchange line settings of the group
(in a group with the Exchange line authorisation: Use the exchange line
authorisation of the subscriber, the box does not have any exchange line
authorisation).
• Only for subscribers: call allowance account
8. In the Based on list field, select a template from all boxes created so far.
Template: The new box obtains all properties of the selected template during
creation (except Users/authorisations, PIN for remote access, and
Announcements).
Standard: The Basic settings are used for the box just created.
9. Click Save.
10. Click 1:1 assignment.
Further steps:
• Click Configure to view or change the properties of the boxes.
Preconfiguring Voice Mailboxes (Box without Assignment)
You can preconfigure voice mailboxes to which no user has been assigned.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Voice Mail and Fax Boxes
Voice Mailbox
Creating Voice Mailboxes
223