Auerswald COMpact 4000 Operation Manual page 337

Note: You cannot recharge a call allowance balance if Unlimited allowance
under Charge according the following pattern is selected.
Setting Credit for several Call Allowance Accounts
Requirements:
• External S port (optional, see chapter Important Information > Product Details > Basic
0
Assembly and Extensions)
Important: If using an analogue exchange line or a VoIP account for external
calls, the call allowance account doesn't work.
• The AOCD service attribute released by the network provider (charge transmission during
the connection)
• Soft LCR configured
• Tariff table set up
1. Open the page Functions > Call allowance accounts.
2. Click Set call allowance.
3. Enter the desired amount in the on ... EUR entry field.
4. Select the check boxes of the subscribers in question to set their call allowance
balance or select the check box at the bottom to select all subscribers for charging.
5. Click Save.
Note: You cannot set a call allowance balance if Unlimited allowance under
Charge according the following pattern is selected.
Setting Allowance Amount for several Call Allowance Accounts
Requirements:
• External S port (optional, see chapter Important Information > Product Details > Basic
0
Assembly and Extensions)
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
Call Allowance Account
Configuring Credit for a Call Allowance Account
Functions
337