Auerswald COMpact 4000 Operation Manual page 481

To reset the door terminal to the default settings of the device template,
delete the door terminal on page Devices > Device wizard and create the
door terminal again.
Creating a VoIP Door Terminal
Requirements:
• Door terminal (optional, see chapter Important Information > Product Details > Basic
Assembly and Extensions)
1. Open the page Devices > Device wizard.
2. Click New.
3. In the Device template list field, select a device template that matches the existing
door terminal.
4. Enter a name for the door terminal in the Name entry field.
5. In the Module and Port list fields, select the module and the port to which the door
terminal is connected.
6. Click Save.
7. Enter a new internal number in the Phone number entry field. Possible entries:
2 to 4 digits in the range of
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
8. Enter the SIP password required by the connected device in the SIP password entry
field.
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
10 to 9999
Functions
Door Functions
Creating a Door Terminal
481