Auerswald COMpact 4000 Operation Manual page 544

Settings
Internal Telephone Numbers
Creating VoIP or IP DECT Subscribers
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under from ... until.
4. Enter a name for identification purposes in the Name entry field.
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. In the Module / Port list field select VoIP.
6. In the Device type list field, select one of the following options, depending on the end
device connected:
COMfortel IP: COMfortel 1200 IP, COMfortel 1400 IP, COMfortel 2600 IP,
COMfortel 3200, COMfortel 3500, COMfortel 3600 IP
Standard VoIP telephone: Standard VoIP end device (SIP) from other
manufacturers, soft phone (SIP)
Handset on COMfortel WS-IP: Handset (e.g., COMfortel M-100/200/210/300/
310) on a COMfortel WS-400 IP or COMfortel WS-650 IP
Note: Here you can already assign the MAC address and a provisioning file
to the subscriber. For more information see chapter Service and Maintenance
> Provisioning for IP Telephones.
7. Click Save.
8. Repeat step 2 to 7 to enter additional numbers.
544
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016