Configuring The Exchange Line Settings For Exchange Line Access To Be Transferred - Auerswald COMpact 4000 Operation Manual

Functions
Exchange Line Transfer

Configuring the Exchange Line Settings for Exchange Line Access to be Transferred

The exchange line settings for the exchange line access to be transferred
Callback option
Subscribers for the charge burden
Time limit for initiating an external call
Configuring the Exchange Line Settings for Exchange Line Access to be Trans-
ferred
You can configure which exchange line settings (e.g., exchange line authorisation, call
restrictor (outgoing), call deblocker (outgoing)) should apply to the telephone after the transfer.
When this is done, either special exchange line settings can be configured or you can fall back
on the exchange line settings of the line to be transferred.
Proceed as follows:
• Using the configuration manager
Requirements:
• For executing the exchange line transfer: System telephone with configured function key
for the exchange line transfer
1. Open the page Settings > Basic settings.
2. Select on of the available options in the Exchange line settings for the manually
switched exchange line access list field under EXCHANGE LINE CALL
TRANSFER.
3. If you have selected Configure special exchange line settings, configure the
exchange line settings you want.
Note: Enabling/disabling or selecting an option for Configure special
exchange line settings can be carried out as described in the help topics
( ). You do not have to carry out steps 1 and 2 described in the help topic
(opening the page + selecting the subscriber).
302
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016