Remote Configuration And Alternative Connection Options - Auerswald COMpact 4000 Operation Manual

Service and Maintenance

Remote Configuration and Alternative Connection Options

Uploading the Configuration Automatically
Remote Configuration and Alternative
Connection Options
Aside from configuration over the internal network, there is also the option of remote configu-
ration via the Internet as well as configuring alternative connection options under certain condi-
tions.
The connected system telephones can also be configured over the PBX under certain condi-
tions.
You can use the following connection options to configure (either remotely or directly) the PBX
and the ISDN system telephones connected to it:
Configuring the PBX via the In-house Network
The PBX is usually configured via an internal network connection. The PC you use to do this
must be connected to the same network as the PBX.
Configuring the PBX Remotely via the Internet with ARA Server
Remote configuration of the PBX can be accessed via the https://remote-
access.auerswald.de/remote-access on the Internet. This requires a dealer access via the
Internet and enabling of the Auerswald Remote Access (ARA.
Configuring the PBX Remotely via the Internet without ARA Server
You can also configure the PBX remotely via an internet connection (DSL). This requires a fixed
external IP address. Alternatively, you can use VPN or DynDNS. The router on the PBX's
network must be configured accordingly.
Using the PBX (Internal) to Configure internal ISDN System Telephones
You can configure internal ISDN system telephones via an indirect connection using the PBX.
Before you can do this, you must install the ISDN system telephone's COMfortel Set configu-
ration software on the PC you are going to use.
Configuring internal ISDN System Telephones Remotely via a PBX's External S Port
0
You can remotely configure the ISDN system telephone indirectly via an external ISDN
connection using the PBX and a device which is connected to both the external S port on the
0
PBX and to the PC (for example ISDN PC controller). The PBX must be configured accordingly.
Before you can do this, you must install the ISDN system telephone's configuration software on
the PC you are going to use.
719
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016