Information About Transfer - Auerswald COMpact 4000 Operation Manual

Address Books and Lists
LDAP Server

Information about Transfer

Information about Transfer
For the transfer of contact data from the LDAP server of the PBX to the IP end device you have
to enter the following values into the end device.
For the transfer of all selected contact groups (e. g. in the factory settings).
• User name cn=auerswaldschandelah,dc=auerswald
• BaseDN dc=auerswald
• Password auerswaldsecret
For the transfer of single contact groups (e. g. for contact group DECT1):
• User name cn=DECT1,dc=auerswald
• BaseDN ou=DECT1,dc=auerswald
• Password is configurable
For the transfer of contacts of a single subscriber (e. g. for the internal number 31):
• User name telephoneNumber=31,dc=auerswald
• BaseDN telephoneNumber=31,dc=auerswald
• In this case the password is the user password of the subscriber.
Note:
You must enter the complete character string.
Ensure you type the capital and lower-case letters correctly, and do not type
any blank spaces before or after the
In order to avoid input errors, on page User data > Address books >
Settings, in the lines below the entry and list fields you can mark and copy
the user name and BaseDN.
In the configuration manager of the IP DECT server COMfortel WS-400 IP or
COMfortel WS-650 IP you have to enter the user name and the BaseDN on
page Administration > Phonebook in the following fields: the user name
(e. g. cn=auerswaldschandelah,dc=auerswald) in the Bind user entry
field and the BaseDN (e. g. dc=auerswald) in the Base entry field.
188
,
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
and = characters.