Targeted Voip Access; Initiating Targeted Voip Access - Auerswald COMpact 4000 Operation Manual

Functions

Targeted VoIP Access

Initiating Targeted VoIP Access

Targeted VoIP Access
An external call can be initiated via a specific VoIP account using targeted VoIP access point.
The Internet service provider's network can only be accessed via targeted VoIP access,
e.g., when querying the mailbox.
Initiating Targeted VoIP Access
Proceed as follows:
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
1. Pick up the receiver.
2. Enter the account number. Possible entries:
Internal number of the VoIP account
exchange line telephone: with preceding **)
3. Enter an external number. Possible entries:
External number
preceding exchange line access number)
Note: In any case, the external number must be dialled with the corre-
sponding local area code, even if it is your own local area code. The special
numbers provided by the VoIP provider for checking one's account status or
dialling usually do not include a local area code.
The subscriber is called.
Note: No callback is possible (CCBS or CCNR) for outgoing calls over VoIP.
342
(for exchange line request type Internal telephone: with
COMpact 4000 - Firmware V6.6A - Installation, Operation and Configuration V03 03/2016
(for exchange line request type Direct